Power Output: | 120W RMS into 8 Ohms 200W RMS into 4 Ohms |
THD (unweighted): | < 0.001% 1 kHz at 80% of rated power < 0.01% 20 Hz - 20 kHz at 80% of rated power |
Audio Inputs: | 2 sets of balanced XLR, 8 further RCA inputs |
Audio Outputs: | Preamp output, Record output |
Frequency Response: | 10 Hz - 50 kHz +/- 1 dB |
Signal to Noise Ratio: | > 93 dB (ref 1W/8 Ohm) |
Input Impedance: | Inputs 1 and 2 (balanced) 20 kOhm Inputs 1-7 unbalanced 20 kOhm Rec Input 20 kOhm |
Power amp damping factor: | > 110 at 1 kHz |
Max power consumption | 800W |
Quiescent power consumption: | Active (no signal) 70W |
Standby Power Consumption: | Standby <0.5W |
Bass/Treble controls: | Shelving type Max bass boost/cut +/- 10 dB at 10 Hz Max treble boost/cut +/- 7.5 dB at 20 kHz |
Dimensions (H x W x D): | 115 x 430 x 385mm (4.5 x 16.9 x 15.2”) |
Weight | 15.0kg (33lbs) |
Class XD™ amplification designed to eliminate crossover distortion at low signal levels |
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance |
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms. |
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers |
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box |
CAP5 protection technology for trouble free operation |
Acoustically damped full metal chassis with thick brushed aluminium front panel |
Customisable front panel display |
Balanced and unbalanced analogue audio inputs for superior connectivity |
RS232 controllable |
Eco-friendly <0.5W Standby power consumption |
Available in black and silver finishes |